Rocktron Unity Tuner Manuale delle Istruzioni Pagina 1

Unity TunerInstruction ManualThis pedal is:

Step 1 - plug the guitar/bass into the tuner - see “connections” section.Step 2 - play a note on your guitar. Pluck your E string, if needed, adjust

Tuning Instructions - STROBE:The STROBE function of the UNITY Tuner is extremely senstive.Step 1 - plug the guitar/bass into the tuner and press the “

Calibration:To match the pitch of any instrument or audio source (like an old piano or tape player) press the “Calibrate” button while simultaneously

Hints and Tips:The Unity Tuner is sensitive, so it is not necessary to strike your string very hard. Standard string attack will work. Additionally,

SpecicationsMaximum InputMaximum OutputInput ImpedanceOutput ImpedanceCurrent ConsumptionPower RequirementsDimensionsWeight3.8dBu5.8dBu1MΩ100Ω15mA9V

How to change the battery:To change the battery, turn the pedal over and remove the 4 screws on the bottom. Remove the back cover. Carefully remove

Rocktron - A Division of GHS Corporation2813 Wilber AveBattle Creek MI [email protected]: 1-269-968-3351rev. 0607112011.1

Your Unity Tuner™ pedal has been tested and complies with the following Standards and Directives as set forth by the European Union:Council Directive(

Do not block any ventilation openings (if applicable). Install in accordance with the manufacturer’s instructions.Do not install near any heat source

Introduction:Congratulations on your purchase of the Rocktron Unity Tuner.The Unity Tuner is a true “on-stage” tuner for any gig. The Unity Tuner’s l

Descriptions

Descriptions continued...DISPLAY Window - This black window houses the LEDs and controls for the Unity TunerNOTE LED BANK - This bank of blue LE

Descriptions continued...CALIBRATE button - this button is used to calibrate the tuner to match the pitch of any instrument or audio source (lik

MUTED Connection

CONSTANT Connection